| Results:415
back|1|2|3|... | 20|21|forw
Company Info ::::
Petefi Šandora 8
Palić, 24413
Serbia
Tel.: 024/755-441
on the map

Style:

  • Amiad
  • Clicktif
  • Dan
  • Dan 2001
  • Dan 2005
  • Dan 7800
  • Fogger
  • Greenspin
  • Injektor
  • Mamkad
  • NaanDan
  • NaanDanJain
  • Super
  • Super Mamkad –10
  • T-tape
  • Turbo Jet

service description:

The company HIDROPAN Ltd. was established in 2004. with its office in Palić. Our occupation is agricultural (professional) irrigation of fruits and vegetables indoor and outdoor.
We provide material for the irrigation from the company "Dan" from Israel. We project, distribute and service the entire mounting system for irrigation.

We have ideas about new challenges in the production of fruits and vegetables (bigger yields, extra quality), and the trend of irrigation in the world, we are specialized on microirrigation where we use micronozzles and the drop by drop way of irrigation.

We pay special attention on micronozzles, whose value has increased exponentially, due to extreme weather conditions (heat, late spring frost, etc.).
Therefore, except the normal irrigation systems, we offer a variety of technologies for irrigation with micronozzles:

1. Cooling and adjusting the microclimate (relative humidity of the air) in the open field and indoor.

2. Protection of the spring frost (up to -10 C) in the open field and indoor.

3. Feeding - distribution of nutritious matter (watermelting artificial fertilizer) using the micronozzle.

4. Regulation of the plants fruit size (apples, peaches) and the coloring of them.

5. So called "fast germination" of the slow germinate seeds (green vegetables,carrots,etc.).
The technology is based on the upper layer of 2-3 cm kept always wet.

Every year, bigger and bigger surfaces are watered by our technology and system for irrigation.

We expect you to join our camp of satisfied producers.

Šandor Petefi street 8
24413 Palić, Serbia
Tel: +381 (0)24/755–441
+381 (0)64/168–92–54
E-mail: hidropan04@tippnet.rs
Web: www.hidropan.rs

More contacts:

  • direktor Feher Friđeš
    Tel.: 064-168-92-54, 
  • Tel.: 064 / 64-69-995 , 

your images:

Amiad
Clicktif
Dan
Dan 2001
Dan 2005
Dan 7800
Fogger
Greenspin
Injektor
Mamkad
NaanDan
NaanDanJain
Super
Super Mamkad –10
T-tape
Turbo Jet

agricultural
Company Info ::::

service description:

Production and mounting of ALU and PVC doors and windows.


Noval company Ltd., like many private companies of similar production activities, crossed the path of workshops to modern production. It was established in 1996. as an independent craft shop for production and installation of aluminum windows and locks. At that time, it had four employees and achieved a modest income.

The volume of business had grown, competition in the industry strengthen. The market conditions of business development have caused a change of organizational form suitable both for a greater volume of work and for an adequate response to the wishes of all selective market which requires high quality and favorable prices. Thus, in 2004. this craft store grew into company with limited liability.

Today, Noval Ltd. has twelve employees. Beside manufacturing aluminum windows, there is a production of PVC equipment with the new "Urban" machines for processing PVC profile, as well as production and processing of all types of glass.

Production is mainly for domestic market and partly exported to Montenegro. Post office building in Subotica, objects Nikolas and the Manager in Belgrade, a large number of branches of Raiffeisen Bank, Hypo Alpe-Adria Bank, ProCredit Bank and Erste Bank, are only part of the facilities which Noval Ltd. equipped with their products (see Reference list). Besides that, in the past four years the company has equipped a large number of business and private buildings.

More contacts:

  • Proizvodnja
    Ulica 420 Br 18
    Tel.: 063/577-601, 
  • Proizvodnja
    Ulica 420 Br 18
    Tel.: 063/7715-406, 

your images:

accordion doors
al blinds
aluminium carpentry production and assembly
aluminium door window
aluminum and pvc door
aluminum and PVC kiosks 
aluminum and pvc showcase
aluminum carpentry accessory
aluminum fences
aluminum garage door
aluminum window 
automatic garage doors
automatic slide door
blinded fix mosquito net
blinded mosquito net
building carpenter
carpenter
carpenter PVC irons
chains for slide door 
garage door
garage door remote control
Company Info ::::
Nikole Tesle 47/I
Vladičin Han, 17510
Serbia
Tel.: +381 17 471 022
Fax: +381 17 473 133
on the map

Style:

  • Hanplast
  • Papirplast
  • Plastflex
  • Roloflex
  • Šoteks
  • Trevifleks

service description:

The company "NBA2 PLAST" Vladicin Han was established in 2005, it is specialized for production of waterproof, water-repellent and other impregnated materials, PVC, polyurethane and rubber fabric.

With long year of experience from 1992 we have achieved outstanding business relationships with medical institutions, defense industry, wholesales of medical supplies, printing houses, publishing houses, etc in the field of fabric impregnation.

Production program:

1. Sotex, Treviflex
- Waterproof polyester powder-stained cloth of excellent quality
Available colors: smb, black, navy, royal blue, green, beige, white, red, grey, etc.
The purpose of making the following products:
- sport bags and schoolbags
- business bags and laptop bags
- ladys bags
- vanity case
- Badges and Wallets
- Backpacks

* Hunting equipment:
- holster for rifle and shotgun

2. Plastflex watertight plastic coated polyester fabric
- Protective cover for mattress
- Oilcloth for hospital beds
- Protective apron
- Blinds
- Sleeping bags - waterproof protective layer
- Pool covers
- Sport facility covers

3. Roloflex waterproof polyester fabric
- Rubberized cloth for medical facilities
- Oilcloth to protect mattress
- Protective cover for the bed
- Protective aprons for butchers
- Blinds
- Light covers

4. Bookbinding paper / canvas. Papirplast, Hanplast
- For printing, bookbinding, publishing houses
- Bookbinding paper without printing and bookbinding paper with printing

5. Packaging and protection plates
- Rubber fabric

6. Cotton canvas tarpaulin
- Impregnated cotton cloth
- Armor for hunters and fishermen

7. Special fabrics
- Wholesale and production of fabric
- Tarpaulins and tarpaulin canvas
- Truck tarpaulins
- Flat tarpaulins of all sizes
- Canvas awnings, tents, swimming pools, etc.

www.pvcplatno.co.rs

Kontakt:
E-mail: nba2plast@gmail.com

Tel.: 017/471-022 Fax: 017/473-133
Mob.:062/795-062 Mob.:063/498-033

your images:

Hanplast
Papirplast
Company Info ::::.

service description:

Our company, "HARPET MV", deals with plastic processing.



WE POUR YOUR IDEAS INTO A FORM!

We make your ideas come true even from the development to the production!

Our main activities are bottle blowing, injection molding, and screen labeling, as well as wholesale and retail sale.


Our product offer:

We produce bottles from 200 ml to 6000 ml, from PE, PP PET and PVC materials.

We also do screen labeling of the bottles.

We produce injection molded caps and packaging material.

The knowledge of our experts, with many years of experience, is the warranty to meet the demands of the customers in full.

We fulfill your orders within a short time.

We offer you help to make your ideas
come true in the research of a unique
cap, material or color.

During production we take the environmental requirements into account.

We constantly improve the production efficiency, improve the specific energy usage, we strive to minimize and recycle the waste generated by manufacturing.

Contact information:
Harpet MV doo
Tel: +381/24 553 022, +381/24 553 023
Mob: 069 20 22 802
E-mail: harpet@harpetmv.co.rs
harpet.komercijala@harpetmv.co.rs
finansije@harpetmv.co.rs

More contacts:

your images:

Persident

blown packaging
bottle up 499 ml
caps
caps and handrails
caps for wine bottles
HORECA
horeca equipment
jars and cups to 499 gr
lids
lock
ofset printing
package from plastic mass
pet packaging
plastic
plastic bags
plastic bottle
plastic bottles
plastic bottles.
plastic caps
plastic closures
plastic containers
plastic containers.
plastic cups
plastic fabrication
plastic glass production 
plastic jars
plastic kettle

service description:

The company PlastMa was established in 2002 in Bačka Palanka, Serbia.

The company is specialized for plastic injection machines and auxiliary equipment.

We are the exclusive representative for Ex Yugoslavia:

HAITIAN - classical and servo-controlled machines for plastic injection.

ZHAFIR - electrical machines for plastic injection

SHINI - auxiliary equipment for plastic processing (drying, transport granules, feeders, blenders, chillers, equipment for tempering, grinding mills, robots...)

REFERENCES: over 430 delivered machines for plastic injection, from 600 kN - 21000 kN closing strength.

Guided by the principles of competence and expertise, with long years of experience, high quality equipment and competitive prices, we have achieved results that we are proud of: more than 430 installed machines for plastic injection and successful cooperation with over 150 firms from our region.

Our esteemed customers are the most famous companies in this field in the region. Our most important task is as a representative manufacturer of equipment is to ensure reliable and efficient service and technical support.

In addition to qualified service personnel, we have available stock of spare parts and equipment, and logistical support to our principals.


Series MARS II

Second generation of economical, servo plastic injection machines.

Haitian is one of the pioneers in the progress of production of energy effective injection machines and has four patents from this area. The series MARS is a best-seller from the company, Haitian, until now 100.000 pieces have been sold worldwide.

The innovative concept achieves energy savings of 20% to 80% compared to conventional hydraulic machines.

Modular construction, a wide range of possible applications, improved system control unit injectors and the latest control technology from Austria, are just some of the reasons why this series has achieved such success on the market.


Series JUPITER II


Second generation of economical, servo plastic injection machines with two molding plates.

It is intended for injecting products of large dimensions, like parts for car industry, garbage containers, plates, packaging and similar.
Jupiter II is improved by a series of machines with closing forces from 6000 to 60 000 kN. The biggest delivered machine in this series is JUII of 66 000 kN.


Series PLUTO

Classical hydraulic injection machines with a closing power of 860-5300 kN.

Series PLUTO is meant for production for wide consumption, like household products, products for general purpose and similar. It is a very reliable series of machines at affordable prices.


Series IAPETUS

"Two-colored" (two-components) plastic injection machines.


Series VENUS II


Second generation of electric plastic injection machines.

The result of intensive cooperation between German and Chinese specialists, with the motto "Fully electric design at affordable prices," Venus II series adapts to the most varied and most complex requirements manufacturer. We offer a standard version, models with greater driving force, as well as specialized models for the production of packaging. High speed injection (350 mm/s), parallel movements in all axes, superior performance.


Series ZERES - hybrid injection molding machine


Series ZERES combines the best features of a fully electric machines VENUS II and servo-hydraulic machine MARS II.

Extremely flexible hybrid injection molding machines with servo-electric drive screw and the opening/closing of the mold, a servo-hydraulic drive cylinder bouncer and management centers.

ZERES offers all the benefits of a fully electric machines: precision, energy saving, fast cycle, as well as easy maintenance and cleanliness of the working environment, with a significantly lower price.


Series MERCURY

Newest generation of electric plastic injection machines, developed in cooperation with German and Chinese engineers.

In the development and production we use the newest knowledge and technologies to get the machine with superior characteristics.

The series Mercury is intended for injecting products of the highest and most complex demands, like: complex geometrical shape, accuracy of dimensions, particular mechanical and other characteristics.


Auxiliary equipment SHINI:

- feeders and mixers
- mills
- robots
- dryers
- temperirals
- transporters


New in our offer - Vertical injection machines TAYU

The company TAYU Machinery Co., Ltd is one of the leading Chinese manufacturers of vertical plastic injection machines.

The vertical injection machine TAYU is recognizable by its compact and elegant design, which also allows easier access to the mold, easy maintenance and significant savings of work-space. The vertical configuration ensures precise control of the production process and high quality products. A wide range of possible applications: electrical parts and components, auto parts, tools and technical equipment, products with coating, the combination of colors and materials, and similar.

The offer includes:

1. The standard vertical injection machine -series TY

2. Vertical injection machine without ribbon - Series TC

3. Vertical injection machine to produce larger dimensions - series TK

The available versions for each of the series: models with fixed, mobile (1 or 2 workstations) or rotating table, and two-colored machines.


Visit us on our website:
www.masine-za-brizganje.rs
www.plastma.net

your images:

HAITIAN
SHINI
TAYU
ZHAFIR

ancillary equipmen
Company Info ::::.

service description:

Rađenović-Plast Company offers its services to the market since 2008.

In the beginning, our main business was to repair plastic and polyester objects. Shortly after this we began to produce plastic and polyester objects and molds.

As the needs of the market became more demanding, our company developed and expanded both in terms of the types of services and in product range.


Since 2009 our services include: 

* Restoration and repair of all types of tanks (with polyester) 
* Repair of truck tarpaulin 
* Installation of polypropylene pipelines


In 2010 we expanded our services with: 

* Polyester industrial floors 
* Industrial floors - epoxy resins 
* Isolation and laminating vans and pick up trucks 
* Producing new truck tarpaulins, awnings, banners, etc.


Since 2011 we offer to the market: 

* Production and repair of complex objects made ​​of polyester, and coating of large concrete surfaces of tanks 
* Restoration of industrial waste-water tanks with polyester coating 
* Installation of PVC and PE industrial pipelines. 
* Plexiglass program


Our special offer:



- no smoking and smoking signs




Rađenović-Plast Company will continue to tend to improve the quality of its services and products.

www.cerade.rs
www.plastika.rs



NEW - NEW - NEW - NEW - NEW



PLAYGROUNDS FOR CHILDREN

Rađenović-Plast Company is able to offer the customers a wide range of elements for playgrounds:


Slides

Slides are made by laminating glass cloth and polyester resin and characterized by excellent physical and mechanical features. Slides are UV stable. The length of the slide is 3 meters.
Standard colors are: blue, red and yellow.
We make colorful slides and slides with features (eg, Sponge Bob, etc.).
We deliver childrens slides in the form of boards or with complete construction.
The construction is metal, can be assembled and disassembled and is able to be applied on all types of surfaces.


Toys on a spring

We produce toys on a spring, with different motives:
horses, rabbits and others .




Jungle gyms

Jungle gyms are suitable for children from 3 to 13 years of age.
Jungle gyms are two-sided, one side is an artificial rock and the other side is a net.


We are also able to produce other equipments for playgrounds: swings, seesaws, etc...

your images:

awnings
awnings tarpaulins
bath tube - polyester
children playground
cirade
Covered terrace
equipping children's playgrounds
floor plastification
glass roof
hinták
industrial floor
industrial floors plastificators
metal plastification
methodology of shading (window shade roll-top)
plastic
plastic racks
plastic tanks
plastification
plastification
plastification of finished products
plastification of metal
plastification of metal products
Company Info ::::.

service description:

New store in Belgrade:
Smederevski put - Bulevar revolucije 45
Kaluđerica
063/117-30-25


Dual - Production of profiled facade metal sheets for roofs.

Production of profiled metal sheets for covering buildings and related construction metal sheets.
Profiled sheets are intended for covering roofs and facades of not heated buildings or as final coating of ventilated roofs and facades.

Production and sales of trapeze metal sheets, aluminum walls, gutters and other construction metal sheets.

Aluminum walls are produced from aluminum metal sheets. It is extremely resistant to water and atmospheric effects, is does not get corrosion, does not need any maintenance neither if it is embedded in your inner nor in outer space.

The final elements of the aluminum walls are boards, and they are knocked with aluminum nails for a barbecue, a horn on a house or another prepared surface.
Construction metal sheet works are related mostly to the roof and gutters of roof windows or chimney.

Our products:

- tin tile panels
- profiled metal sheets
- profiled metal sheets for roof and facade
- ribbed metal sheets
- aluminum walls
- gutters
- metal sheet accessories

Services:
- cutting of aluminum and galvanized metal sheets by the customers wish
- sheet bending

Phone:
031/894-550
063/622-560
063/117-30-28

Element for life!

More contacts:

  • Tel.: 063 1173 028, 
  • Tel.: 063 622 560, 

your images:

al metal sheets
aluminium baseboard
aluminium sheet
aluminium slats
aluminum
aluminum sheets
building tinker
corrugated sheet metal with felt
cutting sheet metal
galvanized tin
hv sheet
metal products
metal sheet
metal sheets
Profiled roofing sheet
Company Info ::::.

service description:

STZR ,,METALOUNIVERZAL”
-Manufacture of wire products-

We are producing and selling wire products, such as:
galvanized and pvc coated universal mesh
construction and craft nails of all sizes
barbed wire
galvanized and pvc coated wires with various thickness
concrete and metal poles
fence installation services
stretchers for wires

The production is automated and in accordance with standards.
We do installation services professionally with modern machines and with all required tools.

We want peoples to recognize us by our quality work, that is the reason why we try to make high quality products and services.

More contacts:

  • gdja. Nataša Spasojević
  • gdin. Dragan Babić
  • G-din Drago Spasojević

your images:


burned wire
caps to the posts
construction nails
enclouser cover with plastic
fence
fence making
fences
galvanized wire
grif knitwear
little concrete pillars
Mesh galvanized
metal fences
nail manufacture
Nails
plastificated njire
pocink pletivo
screw product bevel
sculpture
sell galvanized wire
stingly wire
universal Mesh
Universal Wire Mesh from plastic
Universzalis háló drót
wavy knit
wire
wire accessories
wire and web
wire elements
wire fence
wire product
wire wholesale
wires
woven wire fence
yard fences

burned wire
caps to the posts
construction nails
enclouser cover with plastic
Company Info ::::.

service description:

Production of:

Aluminum blinds


Blinds crafted entirely of aluminum, especially suitable for outdoor use and combination of stuffed lamella. Boxes of polyurethane provides durability and excellent insulation. It operates manually or via tape and crank over engine with a switch and remote control.

Mosquito nets

Mosquito nets with fix frame belong to the traditional method of protecting windows and doors of the annoying insects. The frame is made of aluminum profiles, which provides permanent tightness and withstand bad weather conditions.

Garage doors

Aluminum roll-up garage door will certainly meet the required quality, the maintenance of these doors is reduced to a minimum of time. It is possible to install a system to raise the crank or motor.

Plastic blinds

In our offer you can also select between standard and external blinds that can be installed on already installed windows without regard to the material.

PVC windows and doors

Many years of development and production of high quality PVC and aluminum windows and doors, shutters, foundations for the realization of the goal that we set in the beginning of the primary: the satisfaction of our customers.

Blinds, awnings, tarpaulins

Roller blinds, mosquito nets, mosquito nets, mosquito nets fixed. Quality and professional installation of mosquito nets.

Strip curtains

Vertical blinds are the modern solution for protection from the sun, which is a practical combination of aesthetics and functionality. In addition to the protective role, enrich and give warmth to modern, especially commercial interiors.

More contacts:

your images:

aluminium blinds
aluminum garage door
awnings
blind
blinded mosquito net
fix mosquito net
garage door
garage door remote control
methodology of shading (window shade roll-top)
mosquito net
mosquito net assembly
moving mosquito net
plastic blinds
plastic shutters
pvc  blind
PVC blinds
strip curtain
venetian shutter
window 
aluminium blinds
aluminum garage door
Company Info ::::

service description:

"GRAFOPRODUKT" doo SUBOTICA
*PUBLISHING AND PRINTING BUSINESS
*PRINTING SERVICES

EN ISO 9001:2008
EN ISO 14001:2004
EN ISO/IEC 27001:2005
EN ISO 50001:2011
OHSAS 18001:2007
Excellent SME



The printing and publishing company "GRAFOPRODUKT" was established in 1992. The development direction of the company is not just about the enlargement of our machine park, but also increasing the number of our staff, in order to meet the demands of the market and to find new potential opportunities for collaboration.

In addition to publishing books and newspapers we can print catalogs, brochures, leaflets and make light cardboard packaging and labels.


PREPARATION
3 operators work on high capacity computers, that allows undisturbed work. We do services like: scanning, filming and CTP panel lighting.

To satisfy our customers we also do:
- book fracturing
- designing of catalogs and commercial surfaces
- making logos
- making photographs in high resolution - of buildings, products and objects for different publications.

You can read more about the delivery of printing material and our offer on: www.grafoprodukt-subotica.rs


OFFSET
The basic technology is offset printing.
We have 4 offset machines:

- Four colored B2
- Two colored B2
- Four colored A3
- One colored B3

Our technical abilities allow printing on papers from 60 to 400 grams.

In addition, we have digital printing and large format printing.


SOLVENT
- Mimaki CJV solvent printer (CJV30-160)
- Integrisani solvent printer-cutter (Print&Cut)
- Mimaki CJV30 solvent printer-cutter is an advanced version of the old Mimaki JV3 solvent printer, with a unique integrated system for printing and cutting, what brigs us a much bigger choice and flexibility in our work.
Starting from souvenir shops, copiers, design agencies, to screen printers, we offer our services of making advertisements and other printing services, the CJV30 series offer high performance printing and cutting to its customers. Advertisements of large format, such as large posters, graphics, POP displays, backlit, window decoration, car graphics, floor advertising, etc..
We are not able to perform fieldwork (measuring, gluing, etc.).

We are able to provide the following services: laminating, plastic coating, film and plate (CTP) lightening , design, fracturing.


FINISHING WORKS
There are three professional bookbinders who do finishing works. Their professionalism is completed by our machine park: benders, collectors, plastic coating makers, laminating machines, benders and staplers of large format.
Besides the above mentioned machine park there are some auxiliary devices which allow us to do:
- numbering
- punching up to format B2 (folders, boxes)
- gluing and sewing books.

Our business partners can count on fast and quality works.


Visit our website www.grafoprodukt-subotica.rs everyone will find something interesting. Because of limited space, it is impossible to present the full range of the production program.
Ask us for an offer and detailed information.

E-mail: grafosu@mts.rs Tel.: 024/555-032
E-mail: office@grafoprodukt-subotica.rs
E-mail: director@grafoprodukt-subotica.rs
E-mail: commerce@grafoprodukt-subotica.rs

your images:

advertising and business materials printing
big sized printing
board packaging
boards lightning
book printing
bookbinding finishing
catalog 
catalogs
CTP
CTP device
design
Design exclusive invitations
design making of invitations
design service
Company Info ::::

service description:

The company, Europlastic, was established in 1986 with the name Europlastik S.Z.R. as a small workshop for plastic injection. The founder of the company is Lovric Milan.

Today Europlastic Ltd. is a company, located in Vojka on the main road leading to the involvement of the highway Belgrade - Zagreb, with 20 employees, our product range includes a wide range of products such as products for house, bathroom, feeders, drinkers for chickens and toys for children.


kontakt

Europlastic doo
Nikole Pašića 26
22313 Vojka


022/2302-918
europlastic@ymail.com
europlastic@ptt.rs

www.europlastic.rs

your images:

feeder
plastic
plastic barrel
plastic bars
plastic basket
plastic bottles
plastic boxes 
plastic caps
plastic chair
plastic chairs
plastic containers
plastic cups
plastic fabrication
plastic fancy good
plastic fittings
plastic furniture
plastic furniture
plastic good
plastic goods
plastic household
plastic items
plastic kettle
plastic processing
plastic product
plastic shelves
Company Info ::::

service description:

VERTEX toolroom deals only with
construction and tool making by order




¤ We produce ¤

¤ tools for plastic injection
¤ tools for wax models for micro molding
¤ tools for tin cutting and shaping
¤ tools for blacksmithing
¤ models and tools, molds for free metal casting
¤ tools for tire repairing
¤ forms for vacumization
¤ complex mechanical parts and prototype parts
¤ special parts
¤ mechanical spare parts by and out of standards

¤ Tools developing, projecting and producing are made by contemporary CAD/CAM programs on CNC and classical machines by 2D, 3D drawings or patterns.



More contacts:

your images:

CAD/CAM
cnc millers
CNC milling
construction design
machine industry
Machines
mechanical parts
metal industry
molds
tool fabrication
tool fabrication 
tool room
tools
tools and machines
tools for plastic injection
tools for plastic makers
Company Info ::::

service description:

Rolostar is a family company from Mali Iđoš, near Backa Topola. Our family company started its operation in 1998. In the beginning, our main activity was the production and installation of various types of blinds, Venetian blinds, mosquito nets and strip curtains.

Over time the market requested the expansion of its activities. In 2009 we started with the installation of the ready-made PVC joinery with our own blinds.

In 2013 we equipped our facilities with the latest production line, thus enabling the manufacture of PVC windows and doors. In our production we use only first-class raw materials from worldwide famous and recognized manufacturers.


OUR SUPPLIERS ARE:

HARDWARE
www.romb.pl
www.siegenia.com

6-CHAMBER PROFILE SYSTEMS
www.roloplast.rs

GLASS
www.guardian.com


Contact:

Rolostar MTB
Kokai 2.
Mali Iđoš, 24321
Serbia

Tel.: 064 2538 114
Tel.: 063 526 320
Fax: (0)24 730-495

E-mail: mtrolostar@gmail.com
Web: www.pvcstolarija-rolostar.com

More contacts:

  • Tel.: 069 2538 114 , 

your images:

al blinds
assembly ribbon curtains
blinded mosquito net
installation of venetian blinds
plastic shutters
producing shatters -aluminum and PVC
production of roll-up doors
production of strip curtains 
production of Venetian blinds
Company Info ::::

service description:

¤ CUTTING, BENDING, PIERCING, WELDING OF ELEMENTS, DESIGN OF SHEET METAL PARTS UP TO 6 mm THICKNESS, PRODUCTION WITH CNC MACHINES OF THE FAMOUS COMPANY "AMADA"

We are dealing with production of metal constructions and construction parts.

M.P. "I L G M" is a mixed company with a headquarter in Kragujevac. It has modern CNC equipment and deals with the service of processing and deformation of sheet metal parts: cutting, bending, punching and welding.

The guarantee of the quality of our products or our services is based on the machinery of the famous World Company "AMADA" as well as on the many years of work experience of our workers in Italy working on these machines.

M.P. "I L G M" is therefore able to fulfill the highest demands of customers in the field of sheet metal cutting, punching, bending and welding.

Cooperation with Italian, German and French companies, as well as the use of sheet metals imported from Italy are another confirmation that M.P. "I L G M" can fulfill all your requirements and thus contribute to the economic interest of your Company.


PRODUCTION PROGRAM:

¤ Wardrobes, lockable cupboard with one or more cabinets in one frame, with an interior shelf for small things and hooks for hanging clothes.

¤ Archive office shelves of different heights and number of shelves, the possibility of adjusting shelf height at every 50 mm.





¤ Cabinets for gas and electricity all types of electric cabinets, built-in or hanging on the wall, with internal panel and protection IP 55.





¤ Panel shelves with hooks
possibility of combination with horizontal shelves of variable height and advertising panel at the top shelf.

¤ Office cabinets suitable for storing all types of documentation: dossiers, folders...

¤ Multifunctional console shelves suitable for furnishing of sales areas, placement of shelves on every 50 mm, possibility of pinning prices, easy installation.




¤ Shoe storage cabinet the place to keep shoes is located in the door itself, so the depth of the cabinets is only 15 cm, the possibility of keeping from 8-12-16 pairs of footwear depending on the height of the cabinet.

¤ Metal sides making metal sides for truck and tractor trailers, fixed and collapsible pillars, mudguards as well as metal chassis parts.





¤ Metal Containers and Structures
containers for the disposal and transport of parts of different sizes and loads.




Other information:

¤ Mob. tel.: +381 63 711 07 78
e-mail: ilgmdoo@mts.rs






your images:

AMADA

archival office shelves
cabinets for gas
console stands
cupboard
cutting sheet metal
formanyomás
gas cabinets
metal archival cabinets
metal archive office shelves
metal cabinet
metal cabinets
metal construction
metal electro wardrobes
metal multipurpose console shelves
metal shelf...
metal shelves
metal sides
metal sides for trailers
metal storage shelves
perforation of aluminum
plastification
sheet processing
sides for trailers
tin bending
tin cutting machine 
treatment of sheet by deformation
tube cutting and welding
wardrobe cabinets
welding
AMADA
Company Info ::::

service description:

The main activity of our firm, which has existed for almost 20 years, is production and distribution of plastic boxes for various kinds of fruits.


PP "PLASTEKS" Ltd deals with production of boxes for berries and nuts (raspberries, blackberries, cherries), and with production of vacuum packaging (BLISTER, SKIN).


"PLASTEKS" has dealt with production of plastic boxes since 2002, and with production of vacuum packaging since the year of 1996.




THE ONLY THING WE OFFER IS QUALITY!!!!!!!

More contacts:

  • Tel.: 063/7796-391, 

your images:

archival product
bin
crate
crates of fruit
Company Info ::::

service description:

NEW in the offer of BOMETAL!




"BOMETAL" d.o.o. from Nova Pazova deals with selling, production and developing of connective elements.
There are connective elements by the strictest DIN and ISO standards and special connective elements (screw, nuts, washers, rivets and others).
- "BOMETAL" cooperates with renowned european companies for connective elements and cutting tools as HSS Tools, OBO Bettermann, Masterfix, POP Tools, MKT from Germany.




DL Chemicals - Pur foams, silicones, MS polymers, removers




Elementi za fiksaciju




Elektrode i žice za CO2 varenje




Čelična užad




Pneumatski i baterijski alati




Pur pene i silikoni




GEKKOU Kobaltne burgije




Vijci i aparat za punktovanje




Brusne ploče




Tehnička hemija




Pneumatski i ručni alati za zakivne navrtke




Masterfix zakivne navrtke




Pneumatski i ručni alati za pop nitne




Pop nitne




HSS burgije




MKT mehanički i hemijski ankeri




PVC vijci




Vijčana roba




Samorezni vijci




Prohromski program




Umetci, bicevi




Plastični tiplovi




Šelne




Neatestirani anker




Brezoni




Navojni umetci




Kancelarija
Kneza Mihaila 87, 22330 Nova Pazova, R. Srbija
Tel: + 381 (0)22 323 765
Fax: + 381 (0)22 323 740
E-mail: bometaldoo@gmail.com
Web: www.bometal.co.rs


Komercijalisti na terenu:

Dragan Popović
Region: Beograd

Tel: + 381 (0)62 401 446
E-mail: popovic@bometal.co.rs

Ivan Miladinović
Region: Beograd

Tel: + 381 (0)69 522 9077
E-mail: miladinovic@bometal.co.rs

Dragoljub Maksimović
Region: Centralna i Zapadna Srbija

Tel: + 381 (0)69 522 9001
E-mail: maksimovic@bometal.co.rs

Miodrag Milojković
Region: Južna Srbija /Nišavski okrug/

Tel: + 381 (0)69 522 9003
E-mail: milojkovic@bometal.co.rs

Vojislav Stojanović
Region: Istočna Srbija /Braničevski okrug/

Tel: + 381 (0)69 522 9004
E-mail: stojanovic@bometal.co.rs

Ivan Kozlić
Region: Vojvodina

Tel: + 381 (0)69 522 0063
E-mail: kozlic@bometal.co.rs

***
Radovan Stefanović
Pločice za CNC mašine

Tel: + 381 (0)69 520 05 52
E-mail: stefanovic@bometal.co.rs

your images:

HSS TOLS
MASTERFIX
MKT
OBO
SICATECH



aluminum screws puncturing
anchor for concrete
anchor screw
anchors
bolts for trucks
bolts washers rivets
buffer blocks
cage nut
chemical anchors
Chemical Capsules
chemical mortar for anchoring
chemistry for anchoring
clamps
concrete drill
Construction
Cutting wheels
device for puncturing
drill
drill
Company Info ::::

service description:

Producing machines for metal plasticization.
Reliable and very effective in work.

Service and maintenance.
In our offer you can find used machines too, or machines which were changed for new.
We give warranty for all our appliances:
- for new appliances 2years
- for used appliances 1year

Apart from being regarded as a high-quality surface protection providing resistance to wearing out - mechanical damages, certain aggressive surroundings, powder coating is also considered to be one of the standards applied in the protection of the environment, because solvents and additives which are harmful to health and environment are not used in the process of electrostatic powder coating.
During the construction of implements, a compromise between West European quality and a price adjusted to Serbian market was attained.

Plastamat PM - 8Device for powder coating of metals. Its very handy when used in the workshops where are both automatic and manual powder coating with color powder are in use.
This device is developed for constant operational use.Container can take up to 15 liters of powder.

Plastamat PM - 9More advanced device for powder coating of metals. Its very handy when used in the workshops where are both automatic and manual powder coating with color powder are in use.

This model have vibro stand witch is very good for constant color shifting. It takes color powder directly for the package. One of the advantages is that Plastamat 9 can operate with only 0,1 liter of powder.

Plastamat PM - MINIDevice for powder coating of metals. As it name saids, it the basic model.

This models can capacity is 4 liters of powder.

More contacts:

  • Direktor g-din. Ivan Stamenov
    Tel.: 064/11-33-019, 

your images:

carpenter fitting
corrodation protect
corrosion protection
Company Info ::::

service description:

„Mini Plast“ is a family company, which deals with plastics processing since 1983.


In 1991, we acquired the technology of molding plastic with blown extrusion. Over the years, we have become specialists for this kind of plastic processing.

WHAT WE PRODUCE


Plastic pharmaceutical bottles and boxes
Plastic canisters
Plastic jars and small jars
Plastic cosmetic boxes
Plastic bottles with spray nozzles
Bottles, jars, balloons and canisters
Pharmaceutical packaging, PE bottles and boxes, bedpans and geese for sick people
Packaging for cosmetics, bottles and boxes, powder bottles
Packaging for cologne, bottles
Packaging for chemical products, adhesives, temperas, inks...
Packaging for chemical products, bottles for toners and bottles for oils
A program of toys, bowls and balls
Production of plastic packing material
Production of other plastic products
Equipment, pharmacy

"Mini Plast" products is can buy at www.miniplast.co.rs




bottles ... more at >>>








canisters ... more at >>>








boxes ... more at >>>









jars ... more at >>>







other ... more at >>>






Mini Plast products is can buy at www.miniplast.co.rs


"Mini Plast"


Tel.: 022 310 235
Tel./Fax: 022 310 236
Mob.: 060 031 32 35

Е-mail: miniplast@ptt.rs

22300 Stara Pazova, ul. Nikole Tesle br. 11

PIB: 101242770
PDV: 130018620
Matični broj: 53453767
Žiro račun: 355-1006146-39

RADNO VREME
Ponedeljak - Petak: 08:00 - 17:00
Subota: 08:00 - 13:00
Nedelja: ne radimo

More contacts:

  • Tel.: 060/031-3235, 

your images:

archival product
blown packaging
canister
cosmetic package
industry plastic packing 
package and packaging
package from plastic mass
packaging for cosmetic products
packaging for fragrances
packaging sale
packing for pharmacy trade
PE bottles and boxes

service description:

Look at the current product on sale www.plastikgogic.rs/sr/proizvodi/akcija




44 years of experience!
Production of plastic objects and process of recycling are taking place in Indjija, at 6000 m2 closed and 15000 m2 open area all together.





The continual extension of production capacity caused the growth of our production range, so our assortment today can be divided into the following units:

WASTE CONTAINERS
www.plastikgogic.rs/en/2531-2


ROUND VATS
www.plastikgogic.rs/en/round-vats


PRODUCTS FOR THE HOUSEHOLD
www.plastikgogic.rs/en/containers-of-large-dimensions

STADIUM CHAIRS
www.plastikgogic.rs/en/stadium-chairs


MULTIFUNCTIONAL FLOORING
www.plastikgogic.rs/en/multifuncional-flooring

SERVICES
www.plastikgogic.rs/en/services



CONTACT US

"MNG PLASTIK GOGIĆ"
22320 Inđija, Kralja Petra I bb, Srbija

Tel.: +381 22 561 674
Tel.: +381 22 555 306
Fax: +381 22 552 141

Official e-mail: office@plastikgogic.rs

CEO Slobodan Gogić

Commercial department
Head of Commercial Department
Žarko Bogovac - z.bogovac@plastikgogic.rs

Sales
Vladislav Živković - v.zivkovic@plastikgogic.rs
Suzana Majkić - suzana.majkic@plastikgogic.rs
Dragana Savic - dragana.savic@plastikgogic.rs

Logistic and purchase
Dragana Janković - d.jankovic@plastikgogic.rs

Marketing
Dragana Janković - marketing@plastikgogic.rs

Finance Department
Head of Financial Department
Mira Džunić - finansije@plastikgogic.rs

Accounting
Jelena Pantić - racunovodstvo@plastikgogic.rs
Slađana Jajić - sladjana.jajic@plastikgogic.rs

Production Department
Head of Production Department
Goran Gogić - g.gogic@plastikgogic.rs

Production manager
Miloš Pešović - m.pesovic@plastikgogic.rs

Quality control
Milan Milošević - milan.milosevic@plastikgogic.rs

your images:

backstages
barrels
bin
bin for recycling
bucket with a pedal
bucket with insert
buy crates
Company Info ::::
Obilazni put 8b
Šabac , 15000
Serbia
Tel.: 015/347-432
Fax: 015/353-962
on the map

service description:

your images:

banderols
caps for bottles
caps for brandy
decorative caps
decorative caps for bottles 
decorative pvc caps
labels for bottles
little caps
lock
plastic closures
plastic wrapping 
PVC cap
| Results:415
back|1|2|3|... | 20|21|forw

Facebook